Electric forklift inspection and maintenance is the key to ensure the progress of the work. The electric forklift checks the relevant parameters and configuration before use to ensure the safety and efficiency of the forklift work. What should you pay attention to before using the new electric forklift? Let's take a look at it!
1.Check that the electric forklift tire pressure is in compliance with the specified requirements, and that the vehicle tools and accessories are complete. At the beginning of the new forklift, the rough surface of the part has not been fully flattened, and there is still a certain deviation between the shape and the assembly position after machining. There will be a gap between the fit and the lubrication condition, and the wear will be larger, relatively speaking, the working temperature. Slightly higher. It is best to use an electronic monitoring computer to check, if not, you can go to the company for consultation.
2.Check the wiring and joints of the electric forklift parts for damage, looseness, water leakage and oil leakage. In particular, the main pump and wheel cylinder of the hydraulic system and the service brake have leakage.
3.Check the lubrication of the electric forklift and the engine or DC motor and lubricate it against the lubrication point of the truck to add engine oil, gear oil and grease.
4.Check the tightening of the electrical forklift mechanical couplings, especially the steering bolts, wheels and tires, lifting mechanisms and other coupling bolts and locking devices are tightened and correct.
5.Check that the connectors, wiring, lighting, etc. of each electrical component are intact and connected. Whether the electrical instrument and the horn and the light can work normally, whether the liquid level of the electrolyte of the battery meets the requirements; whether the relative density of the electrolyte meets the requirements. Regular maintenance checks on the electric forklift.
