Four-way electric forklift: It integrates the functions of a reach forklift, side fork and counterbalanced forklift. In structure. It is basically the same as a reach-type forklift. The gantry is located between the front and rear wheels. There are two arm-like protruding legs in front of the truck. The front end of the legs is equipped with a supporting wheel, and the goods can follow the gantry in the longitudinal direction of the forklift. Move back and forth. When the fork is unloaded, the fork is extended, and after the fork is unloaded, the fork returns to the middle position close to the vehicle body, so the driving stability of the forklift is greatly improved. The difference from the reach forklift is that the two load-bearing wheels at the front end of the fork legs of the four-way electric forklift can be rotated by 90° through the steering mechanism. When the rear wheel turns 90°, the entire forklift can change from front to back to left and right on the spot. Travel, equivalent to a side fork, so it is suitable for long material handling in narrower aisles. Smaller channel widths can typically be within 2 meters.
VNA narrow aisle forklift: The main feature is that the gantry lifting mechanism can be rotated in three directions, and the car body does not need to be rotated during stacking, only the cargo or the gantry needs to be rotated. Therefore the channel width requirement is greatly reduced. At present, the smaller channel is below 1.8 meters. But at the same time. The aisle width also depends on the size of the tray. For example, it is still not possible to reduce the width of the aisle when handling long loads. In addition, in order to increase the stability of the lateral stacking, the required weight of the whole machine is much larger than that of the three-point counterbalanced electric forklift.
