1. Carefully check the hydraulic and electrical system before using the platform. Make sure there are no leaks or exposures.
Can be used for.
2. When using the platform, firmly support the four outriggers on solid ground.
The ground should be higher than the ground) You can use a sleeping car if you want.
3. The platform can be loaded after being shipped 1-3 times by air.
4. Before creating, focus on carefully checking the various components of the lifting platform to make sure the screw connections are secure.
5. Check for leaks in hydraulic pipeline components, loose or damaged wire contacts.
6. When you turn on the power, the indicator light will come on. The next time you start the motor, the oil pump will operate and move up and down with no load.
Check the normal operation of each part once or twice before starting work.
7. After the operator enters the platform, it is necessary to close the guardrail door, insert the latch, secure the safety rope and apply the load.
The center (where people are standing) should be placed in the center of the work surface as much as possible.
8. Overload is strictly prohibited while using the hydraulic platform. During the ascending / descending process, the platform operator
Please do not move.
9. When moving or pulling the hydraulic platform, the support legs must be retracted and the platform lowered to the lowest position.
Operators are prohibited from moving the platform when it is in a high position.
10. If the platform disappears and does not work properly, you will need to shut down the power on time for repairs.
It is forbidden to operate the equipment due to illness, and non-professionals should not disassemble the hydraulic and electrical components.
11. Do not use the machine when the ground is not stable. Do not use the machine when the platform is not stable.
The landing is unreliable, the extension legs are not properly adjusted and leveled, and the platform is lifted.
12. Do not adjust or retract the outriggers when someone is on the platform or when it is being lifted.
13. Do not move the machine when the platform is up. If you need to move, shrink the platform first to ease the cost.
leg;
14. Do not use this machine to lift goods or equipment. This machine is limited to manned and tool operations.
15. Do not perform outdoor operations in strong wind conditions.
12. Do not push or pull objects outward during operation.
13. Do not sit, stand or climb on the platform guardrail.
14. It is strictly forbidden to stand people or stack miscellaneous goods under the aerial work platform.
