First of all, we have to confirm that the recovery tank is full, because when the recovery tank is full, the power of the suction system will be automatically cut off. We need to confirm whether the failure of the vacuum motor causes the failure of the Electric Pallet Truck to absorb water. , check if the switch that controls the Electric Pallet Truck is turned on, and if the battery of the gasket is enough.
If the switch does not work normally when it is turned on, you need to check if the switch is damaged. If it is damaged, you can directly contact the after-sales personnel to replace the switch. Secondly, it is necessary to check whether the micro-switch circuit is disconnected. If the micro-switch wire falls off, the suction motor If it doesn't work, you can reinsert the line head.
When all the above conditions are excluded, we need to know whether the various parts of the floor gasket are damaged or blocked. In the case of damage to the stain pipe, the customer will also wrap the tape around the stain pipe and continue to use the waiting for after-sales service. When the absorbent rubber strip is worn and cannot be properly bent, the absorbent rubber strip can be adjusted and replaced.
In addition, we also check the sewer and the recovery tank for blockages. If this is the case, we can clean up the Electric Pallet Truck in time. In addition, there is a detail that is easily overlooked, that is, the opening of the drain cover may also cause the floor. The problem of insufficient suction of the washer.After a series of screenings, the Electric Pallet Truck still does not absorb water, or the suction is small, you can conclude that the small Electric Pallet Truck does not absorb or suck the suction motor damage. In this case, we need to replace the floor cleaning The suction motor of the machine.
