1. Before driving, check whether the main devices such as brakes, horns, steering gears, signal lights, etc. are in good condition. If they are not in good condition, they must be repaired and replaced. After they are in good condition, they can drive. Before the battery car starts or after starting, it must be honked according to regulations. Strictly follow the wellhead signal indicator; no smoking, diet and chat are allowed in the driving.
2. It is strictly forbidden to be overweight and super long (the front part of the car body must not exceed, the rear is not allowed to exceed one meter, the overtaking parts should be added with trailers), the extra wide (the body is about 0.2 meters), and the super high (1.8 meters from the ground). Rolling objects or sporadic pieces must be bundled securely or placed in the slot. Influencing the line of sight or the environment is complicated, it should be led by the artificial Gasline LPG Forklift operator; speeding is prohibited, and the running speed is controlled within 10km/h.
3. Gasline LPG Forklift's cab, not allowed to sit over, no carriages or barriers are strictly prohibited. Gasline LPG Forklift is strictly prohibited from climbing and jumping while driving. It is strictly forbidden to follow the car (not more than two people) in the compartment sill and the shovel bracket.
4. Strictly limit the number of vehicles that the locomotive pulls each time.
5. The locomotive or mine car can not be reset by the hard pull of the locomotive.
6. Leave the car after parking, to pick up the key, and to lock.
7. When the Gasline LPG Forklift operator leaves the motor car, he should take the reverse handle and turn the brake handwheel clockwise to make the motor car brake. The next time you get on the bus, you should first put the handwheel brake in a mitigating state, and then perform the above operation procedure.
8. After the work is completed, all parts of the vehicle must be carefully inspected and cleaned. When problems are found, repair and eliminate them in time, and cut off the power supply.
