1. If the warehouse forklift fails during operation, the main handle should be quickly returned to the “zero” position to avoid damage to the equipment.
2. If there is abnormal sound in the operating parts of Warehouse forklift, the bearing parts will have abnormal heating, and should be stopped to check and eliminate the fault.
3. If there is any abnormality in the operation of Warehouse forklift, stop it immediately, check all electrical equipment (including connecting wires), if it is found that the insulation is damaged, stop using it, and send Warehouse forklift to pull it back to the garage for repair.
4. When the warehouse forklift needs to brake and stop, the handle of the driver controller must be operated to decelerate in the “brake” position and then use the air brake or the handwheel brake (the main handle should be placed at the zero position at this time). Reversing the way to brake. If the warehouse forklift needs to be operated in reverse, it must be stopped by the warehouse forklift before it can be operated in the opposite direction to avoid damage to the equipment.
5. In the event of damage to the fuse, it shall not be replaced by a fuse or copper wire that does not conform to the regulations. You should look for a professional Warehouse forklift for after-sales or staff maintenance.
6. It is strictly forbidden to prevent any objects on the cover of the Warehouse forklift power supply. The foreign objects dropped to the cover should be removed in time to prevent the cover from being deformed and short-circuiting the battery.
