Whether we are driving a motor vehicle or a non-motor vehicle, we have to put safety in the first place. So, what safety knowledge do we need to know to use the electric Electric Order Picker? Let's take a look at it!What are the safety tips for using the Electric Order Picker?
1. The choice of power supply for electric Electric Order Picker, first talk about the choice of lithium battery (because of large capacity, low natural consumption, low pollution), followed by lead-acid dry battery (good sealing, not easy to leak electrolyte), we Prevent electrolyte leakage, contamination, corrosion and damage to our bodies.
2. There are some low-speed electric Electric Order Pickers whose power supply voltage reaches or exceeds 96 volts, which exceeds the safe voltage threshold. It is very prone to some electric shock accidents, so we must pay special attention.
3. We have to always check the circuit insertion point of the electric Electric Order Picker to prevent the contact, contact sparks and heat caused by poor contact. It is necessary to avoid the aging and wear of the line and cause short circuit and string electric accidents.
4. Eectric Electric Order Picker battery sometimes leaks flammable gas when charging, so charging must not be carried out in a narrow, sealed storage room or other indoor environment. Avoid explosive gas mixtures.
5. Electric Electric Order Picker If the quality is not good or the charging time is too long, the temperature of the charger will be very high, which is easy to cause a fire accident, so you can not take it lightly during the night sleep time charging. Pay special attention.
6. When we start the electric Electric Order Picker and start climbing, we should switch the gear position to avoid excessive starting current and overloading of the machine for a long time, causing the coil, circuit, battery and governor of the motor. The temperature of the ground is too high and damaged, and may even cause disasters. Regular inspection of the electric Electric Order Picker is required.
