In the hot season, the forklift used by the machine has been used for a long time, and the machine will get hot!
At this time, the function of the forklift radiator should be played without reservation! The forklift radiator is good, and the forklift can work normally! The forklift manufacturer reminds you: the forklift radiator is well maintained, and do not let small problems cause big accidents!
Forklift radiators are prone to the following problems:
1. Poor lubrication
In winter, the lubricating oil is easy to be heated and thinned, and the lubricating effect is obviously reduced. When the crankshaft rotates severely, the bearings on the connecting rod, etc. will burn out. Therefore, when running in summer, summer lubricating oil should be used instead of vehicles. At the same time, clean the oil-water radiator regularly, and clean the external oil-water to ensure good heat dissipation. In addition, the maintenance of the oil filter should be strengthened so that the oil can flow quickly and dissipate heat.
2. Brake failure
Because the boiling point of some brake fluids is too low, it will evaporate into water vapor at high temperature, forming a gas barrier on the brake brakes, resulting in brake failure. In the hot season, the brake master cylinder, wheel cylinder, rubber ring, aging, brake fluid viscosity and oil volume should be checked, and the brake fluid with a high boiling point should be replaced in time to prevent excessive fuel consumption. Eliminate the braking system entirely. air and so on.
3. High temperature softens the road surface
In addition, high temperature weather deforms the muddy road surface, reduces the additional force on the road surface, and greatly reduces the braking effect.
