If the forklift has not rusted and corroded, then we can use the following methods to prevent it:
1. Scrub the dirt, dust, mud, etc. on the forklift every day;
2. Fork frame, gantry slide, starter, battery, water tank, air filter, etc. are maintained after each work;
3. Check whether there is any leakage in each joint, each oil tank, water tank, each oil cylinder, drive axle, etc.;
4. Drain the sediment from the oil filter.
If the forklift has rusted and corroded, then we can use some remedies:
1. If the surface is only slightly corroded, you can apply oil evenly on the rusted area, wait for about 10 minutes, wipe it clean, and repeat the operation several times.
2. If the rust and corrosion are serious, you can use sandpaper to polish the rusted area, then apply rust remover evenly, wait for about 15 minutes, wipe it clean, and repeat the operation several times.
3. After rust removal, remember to repaint with paint to avoid rusting again.
The above are some methods and measures to prevent forklift rust and forklift rust removal. I hope everyone can maintain their forklifts well and prolong their service life.
