First, in order to prevent the forklift from slipping when forking, it must first run at a low speed and control the speed. After driving to the cargo position, it is necessary to step on the clutch first, then step on the brake pedal, and then stop.
Second, in order to prevent the forklift from slipping, you can first tighten the handbrake and put the gear in the neutral position. Then perform the forklift operation.
Third, when starting, step on the brake and clutch pedals and release the handbrake. After that, you should lift the clutch pedal first. When the car starts shaking, lift the parking brake pedal with your foot, move quickly to the accelerator pedal, and add gas.
Fourth, for novices, if the clutch and brake are not well controlled, it is very easy to stall. So, you must have a good mentality. Don't be nervous. When the vehicle stalls, we must step on the brake and pull the handbrake in time, operate according to the steps taught by the teacher, step on the accelerator deeply and slowly release the clutch. When the forklift floats slightly or the vehicle starts, just release the handbrake. If it is an electronic handbrake, we don't have to worry about it. When the car starts, the electronic handbrake will be released automatically.
