Forklifts, shelves and cargo pallets are the iron triangle combination of warehouse storage, and they are indispensable in warehouse management.
The operation or level of the forklift driver will inevitably cause damage to the guardrail, bracket and pallet. The reason for the damage is to scrape off the plastic powder and hit the heavy shelf.
How to choose and configure the shelves, internal combustion forklifts, and electric forklifts?
Protective covers are added to the legs or guardrails, but this method can reduce the damage to the cargo pallets and shelves caused by internal combustion forklifts and electric forklifts, but the technical level provided to the drivers is not high, making it difficult for managers to judge the operation of forklift drivers level.
When planning the warehouse, the shelf manufacturer can be required to appropriately increase the width of the feeding shelf channel, and reserve a certain safety distance for the driver in advance to reduce the impact of the forklift on the bracket.
The fork gear sleeve is installed on internal combustion forklifts and electric forklifts, which can effectively reduce the damage to the edge position and middle corner of the cargo pallet caused by internal combustion forklifts and electric forklifts. safety test.
Draw a visual deceleration line on the passage floor in place of the deceleration sign.
Many times, experienced drivers will drive faster, causing a gap between the measured gap and the actual gap.
Therefore, a simple speed-down sign may not have an obvious effect.
In fact, in addition to the above four points, how to use cargo pallets to reduce the collision of internal combustion forklifts and electric forklifts on driving shelves.
The most important thing is to require managers to strengthen pre-employment training and improve the safety awareness of forklift drivers before they enter service. In addition, after the driver enters the service, the assessment of the forklift driver will be strengthened.
As forklift drivers, we also need to constantly improve our technical level and safety awareness, so as to fundamentally avoid collision problems.
