Which is more suitable, manual stacker or semi electric stacker?

Although the manual stacker and the semi electric stacker belong to the same forklift, their functions are different:
1. In terms of vehicle configuration, the manual stacker uses manual hydraulic devices, and the semi electric stacker has a variety of configurations. The configuration of semi electric stacker mainly includes: battery, motor, hydraulic station, counterweight, controller, circuit board, sensor and other devices.
2. Battery capacity: At present, the continuous working time of ordinary semi electric stacker is about 3-6 hours, depending on different specifications and models of semi electric stacker! Generally speaking, the larger the battery capacity, the longer the battery life.
3. Equipment problems of the stacker truck manufacturer: the semi electric stacker truck has no drive device and only a few basic bearing wheels and steering wheels.
4. Scope of use: The main function of the semi electric stacker is lifting, which is mainly used for loading and unloading, warehouse stacking, high-altitude reclaiming and other operations that only need to move within a small range. The manual stacker truck is mainly used for the handling and stacking of light goods in a small range, with limited budget and low work intensity.
Comparison of advantages and disadvantages between manual height stacker and semi electric height stacker:
Semi electric stacker truck: simple operation, low price, wide application range, convenient maintenance, low requirements for passage width, low requirements for turning radius, and more flexible turning.
The manual stacker is operated manually by the manufacturer, so there is no too much restriction on the continuous working time. The major limitation is the manpower problem. Therefore, the manual stacker is not suitable for places with heavy workload; At the same time, it is not suitable for places with high strength requirements. The working efficiency of the semi electric stacker is more than 5 times that of the manual stacker, which is simple to operate and low in labor intensity.
The semi electric stacker is a manual push-pull travel, which can be electrically lifted. Semi electric forklift is suitable for short distance transportation and loading and unloading operations in low load areas of factories, warehouses, logistics and other enterprises. The maintenance of the semi electric stacker is relatively simple. How to charge the battery of semi electric stacker? We understand from the following points.
1. The charging environment of the semi electric hydraulic forklift of the stacker truck manufacturer is clean and ventilated. If possible, take out the battery or open the semi electric stacker cover;
2. The electrolyte level of the semi electric stacker shall be 15mm higher than the partition. If it is lower than this scale, electrolyte shall be supplemented in time to prevent battery power loss and affect the service life of light battery semi electric stacker. In addition, the temperature of electrolyte during charging shall not be higher than 45 ℃;
3. Do not expose the semi electric forklift to open fire during charging, because the battery will produce a lot of combustible gas during charging, so it is necessary to prevent the semi electric forklift from catching fire during charging.
4. Avoid contact with skin and acid during charging of semi electric stacker. In case of contact, use plenty of soapy water or consult a doctor;
5. The battery shall be kept clean and dry at ordinary times, and no other items are allowed to be placed on the battery of the semi electric hydraulic forklift.