1. Park the forklift on a flat and hard road, turn off the engine, and keep the forklift in an unloaded state.
2. Lower the fork to the ground and stop the wheel with the parking brake device. If the driving tire is replaced, support the jack on the front side of the frame. If the steering tire is replaced, support the jack on the rear of the frame. center bracket.
3. Use a jack to lift the forklift slightly so that the tires are still in contact with the ground; first unscrew the bolts that fix the inflation tube (composition: head and screw), remove the clip, and then loosen the wheel hub (shape: barrel-shaped) nut .
4. Fully support the car with a jack, unscrew the wheel hub (shape: barrel-shaped) nut, and remove the tire.
5. The installation sequence is opposite to the disassembly sequence. When installing the hub (shape: barrel-shaped) nuts, the tightening torque must reach the specified value. Note: After installation, check whether the inflation of the forklift tire reaches the specified value. After running for a short distance, check again to see if the bolts of each part (composition: head and screw) are loose.
