The battery is very important for the electric stacker. It provides power for the electric stacker and maintains the normal operation of the entire electric stacker. However, as a mechanical vehicle, electric stackers will inevitably have some problems.
As an important part of the electric stacker, once the battery fails, it will bring a lot of trouble to the forklift operator. Today, regardless of the price of the forklift, the manufacturer of the stacker will tell you about the problems that are prone to occur in the battery and the solutions.
Abnormal voltage is a common problem with the batteries of electric stackers.
If the voltage of the battery is high when it is charged, and the voltage drops rapidly when it is discharged, it is most likely caused by the sulfation of the plate. We can only solve it by eliminating the sulfation of the plates.
If the forklift operator finds that the open circuit voltage of the battery is significantly lower during use, it is likely that the battery is short-circuited. We need to check the voltage of the single cell as soon as possible. Excessive electrolyte temperature is also a frequent failure of the battery of the electric stacker.
If the temperature of the electrolyte rises abnormally during normal charging, it may be because the charging current is too large or the internal short circuit of the battery. The measures we can take are to adjust the charging current and check the short circuit in time.
If the temperature of individual cells is too high, it may be due to plate sulfation. Stacker manufacturers remind everyone that no matter what the price of the forklift is, it must be repaired as soon as possible.
The abnormal gas out of the battery of the electric stacker is also a problem that many friends often consult with the stacker manufacturer.
If the battery has no gas or very little gas at the end of charging, it is probably because the charging current is too small or the battery is not fully charged. At this time, the charging current should be adjusted to continue charging.
If the battery does not emit gas after charging, the reason is that the battery is short-circuited. This requires us to check and repair in time. If the battery is gassing too early in the charging process and has a lot of air bubbles, it is because the plates are sulfated. We should eliminate plate sulfation in time.
If the battery gasses during placement or discharge, there are two reasons, one is that it is discharged immediately after charging, and the other is that there are impurities in the electrolyte. Stacker truck manufacturers tell everyone that in the face of this situation, no matter how much the price of the forklift is, it is necessary to put the battery on hold for about an hour to discharge, or replace the electrolyte.
The above are some of the more common problems that may occur in the battery of the electric stacker. No matter what the price of the forklift is, don’t panic when you encounter problems, just follow what the stacker manufacturer told you.
If you need to replace the battery or electric stacker, please consult us.
