1 What is the narrowest distance of the operation channel of the shelf warehouse?
Determine the parameters of the operation channel of the forklift truck (the data collected on the spot must be greater than or equal to the data provided by the truck).
2. How many tons is the heaviest cargo?
Determine the tonnage of the vehicle model. The rated weight of the general model is higher than the tonnage of the actual cargo weight, which can extend the service life of the forklift and reduce the failure rate.
3. What is the maximum height of the electric forklift to lift the goods from the ground?
Determine the height at which the vehicle can lift the cargo.
4. Is there a gradient in the forklift operation site? How many degrees is the slope?
Determine the fork leg (chassis) height of the forklift model; Or whether the model has the function of lifting fork legs (chassis).
5. Is it a single-sided card or a double-sided card? What is the length and width of the card?
Determine whether the model is leg extension type (applicable to single side pallet) or fork forward type (both single and double side pallet are available). Is the card board standard size 1000mm × 1200mm； If not, an extended fork shall be configured (the standard fork length is 1070mm).
6. Does the forklift enter the elevator? If you want to enter the elevator, what is the effective height of the elevator?
Determine the vehicle body height. According to the lowest height of the elevator, configure the lower model.
Note: According to the data provided by the customer, select the vehicle models that meet all the data conditions of the customer, and then determine the most appropriate vehicle models required by the customer. If conditions permit, the field collected data will be more accurate for determining the vehicle model.
